Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
DOES NOT TURN ON:
▪ Check if the cables are connected correctly. Make sure all connections
have electrical and mechanical contact.
▪ Fuses or circuit breakers be faulty or broken. Check the condition of the
circuit breakers and make sure they are compatible with the equipment
consumption.
▪ Make sure the battery is charged enough for the product to operate.
NO SOUND:
▪ The cables to the speakers or RCA plugs may not be connected incorrectly
or defective.
▪ Make sure that the LEVEL control is not at a minimum.
PROT LED FLASHING:
▪ Make sure that the product's air vents are not blocked, and that the
product is not overheating.
▪ The speakers or cables are shorted. Check the speakers, cables, and
connections.
▪ Check that the battery has enough charge.
SOUND DISTORTIONS:
▪ The speakers may be overloaded or defective, lower the level, and then
readjust the level. This setting can be adjusted as follows:
a) On the radio/player, play any musical signal and set the volume to 80%
of the maximum (if the maximum volume of the radio /player is 45 (100%),
set it to 36 (80%).
b) On the amplifier, begin with the LEVEL control at a minimum, and
increase gradually until the LED CLIP starts to blink. Slowly decrease the
LEVEL until the LED goes out completely.
8
Publicidad
