HSM StoreEx HDS 150 Instrucciones De Servicio página 24

english
General description
Button(s) Action
Press the Menu button to change
settings and interrogate stored
values. By pressing the button
again you will exit the menu.
Press the Enter key to confi rm
the selected value.
Press the Control buttons to na-
vigate in the display fi eld.
Stop button stops / ends
the material shredding.
Arrows in the display fi eld indicate active
control buttons and therefore functions
that can be selected if required.
Select material:
 Hard drives

next
Menu settings
In the menu:
• Materials can be selected
• Actual values can be displayed
• Settings can be called up.
Press the Menu button for the menu settings.
24


| back
StoreEx HDS 150
Select material
The material selection window appears in
the display fi eld. The last kind of material that
was selected appears in the display fi eld.
Select material:
 Hard drives

next
Button(s) Action
You can select the material using
the control buttons:
• Hard drive
• CD/DVD (diskette)
• Magnetic tape
Open the following
window "Actual values".
Actual values
The actual values window appears in
the display fi eld.
Actual values:
Operating hours


next
Button(s) Action
The following actual values can
be displayed using the control
buttons:
• Operating hours
• Blockades
• Container full
• Hard drives per day
• Hard drives
Open the following
window "Settings".
Press and hold down the stop
button to reset the number of hard
drives per day counter.
Return to the previous window
"Material selection".


| back

5h 25m

| back
07/2022