Product description
Overview
1
Inlet (suction side)
• With filter cage (3) for submerged installation.
• With hose sleeve for connecting a hose for dry installation.
2
Outlet (pressure side)
• Connection of the return flow to the pond (e.g. via a water course).
3
Filter cage
4
Foot
• With mounting holes for firm installation on the ground, if required.
5
Switching power pack with power cable
• Pump power supply
• For further information on the power pack, please refer to the separate operating manual.
6
Switch for switching on/off the dynamic function
• Different conveyed volumes are pre-programmed in the pump controls for a dynamic fountain
pattern with changing heights and diameters. When the dynamic function is switched on, the
pump is continuously controlled using these values.
6
ARS0049