STAMOS X-METAL Manual De Instrucciones página 30

e) Clean the device regularly to prevent permanent dirt build-up.
f) Do not tamper with the device to alter its performance or design.
g) Keep the unit away from sources of fire and heat.
h) If, after the electric arc has been struck, the sensors on the unit do not
automatically cause a blackout, immediately stop working with the unit and
re-read the operating instructions.
i) The materials used in the construction of the unit may cause an allergic
reaction in the user.
j) The unit is not suitable for use in laser welding / cutting and oxy-acetylene
welding / oxy-acetylene cutting.
k) Opening or tampering with the self-shielding filters is forbidden.
l) Making changes/modifications to the unit that are not described in the
operating instructions is forbidden. Do not use spare parts that are not
contained in this instruction manual. Changes/modifications to the unit that
do not comply with the instruction manual may result in danger to health or
life, or cause other damage.
m) Unauthorized changes/modifications to the unit will void the manufacturer's
warranty.
n) The use of filters with too high a degree of protection (too dark) can be harmful
because it forces the operator to move closer to the source of radiation and
inhale harmful gases.
CAUTION! Although the product has been designed to be safe, with adequate
safeguards, and despite the additional safety features provided to the user,
there is still a slight risk of accident or injury when handling the unit. Caution
and common sense are advised when using the product.