Samsung HW-LST70T Manual Del Usuario página 25

3. Select "[AV] Samsung Soundbar LST70T" from the list on TV's screen.
An available Soundbar is indicated with "Needs Pairing" or "Paired" on the TV's Bluetooth device
list. To connect the Samsung TV to the Soundbar, select the message, and then establish a
connection.
• When the Samsung TV is connected, [TV] Name → "BT" appears on the Soundbar's front display.
4. You can now hear Samsung TV sound from the Soundbar.
• After you have connected the Soundbar to your Samsung TV the first time, use the "BT READY"
mode to reconnect.
If the device fails to connect
• If you have an existing Soundbar (e.g., [AV] Samsung Soundbar LST70T) on the list of speakers
on the Samsung TV, delete it.
• Then repeat steps 1 through 3.
Disconnecting the Soundbar from the Samsung TV
Press the (Source) button on the bottom panel or on the remote control and switch to any mode but
"BT".
• Disconnecting takes time because the Samsung TV must receive a response from the Soundbar.
(The time required may differ, depending on the Samsung TV model.)
What is the difference between BT READY and BT PAIRING?
• BT READY : In this mode, you can reconnect any Samsung TV or mobile device that was
connected before.
• BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the
button on the Soundbar remote control or press and hold the
bottom of the Soundbar for more than 5 seconds while the Soundbar is in "BT" mode.)
ENG - 25
(Source) button on the
PAIR