Samsung HW-LST70T Manual Del Usuario página 8

Inserting Batteries before using the Remote Control
(AAA batteries X 2)
1
1. Press the ^ button at the top rear of the Soundbar remote control. The body will pop out slightly
from the body cover.
2. Turn the remote over, push the body of the remote upwards until the battery compartment is
revealed, and then remove the battery cover.
3. If there are batteries in the remote, to remove the existing batteries.
4. Insert two new batteries (1.5V AAA type) into the battery compartment making sure that the
batteries' polarities (+, -) are oriented correctly.
5. Once the batteries have been inserted, attach the battery cover and then slide down the body of
the remote.
6. Turn the remote over, press and hold the ^ button on the top rear, and then slide the body of the
remote down into place.
• Alkaline batteries are recommended for longer battery life.
3
2
3
1
ENG - 8
2