Publicidad
Idiomas disponibles
Idiomas disponibles
6. Operating Instructions
Be aware of the Safety Instructions. (chapter 3)
Voltage measurement
1.
Switch on the device. (button 3)
2.
Hold the tip of the voltage tester as close as possible to a power outlet or
cable.
3.
When the device detects an AC voltage signal, the LED in the tip flashes
according to the height of the AC voltage. (low, medium, high) At the same
time, three different alarm signals sound.
Attention!
Even without an alarm, dangerous voltage can be concerned! This depends
on various factors. Therefore, if necessary, check the zero voltage with the
voltmeter.
Point Illumination (Torch light)
To turn the measuring point illumination (torch light) on or off, press button 4.
17
English
Publicidad
