KitchenAid 5KSM180LE Manual Del Propietário página 8

PRODUCT USAGE
OPERATING THE SPEED CONTROL LEVER
NOTE: The Stand Mixer may warm up during use. Under heavy loads with extended mixing
time, the top of the unit may become hot. This is normal.
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
1.
Plug the Stand Mixer into a proper electrical outlet. Always set Speed Control Lever on
lowest speed to start, then gradually increase speed to avoid splashing ingredients. See
the "Speed Control Guide" Section.
Unplug mixer before touching beaters.
Failure to do so can result in broken bones, cuts, or bruises.
2.
Do not scrape the Bowl while the Stand Mixer is operating. The Bowl and beater are
designed to provide thorough mixing without frequent scraping. Scraping the Bowl once or
twice during mixing is usually sufficient.
USING THE DOUGH SCRAPER
Turn Speed Control Lever to off (0) and unplug Stand Mixer. Remove dough from the Bowl
with the help of Scraper
CARE AND CLEANING
IMPORTANT: Do not immerse the Stand Mixer body in water or other liquids. Allow the
appliance to cool completely before putting on or taking off parts, and before cleaning the
appliance.
1.
Always be sure to unplug Stand Mixer before cleaning. Wipe Stand Mixer with a soft,
damp cloth. Do not use household/commercial cleaners. Wipe off Beater Shaft frequently,
removing any residue that may accumulate. Do not immerse in water.
*Also available as an optional accessory.
***Can also be used to scrape your Bowl.
8
Electrical Shock Hazard
WARNING
Injury Hazard
.
* ***
WARNING