Activity Tracking; Software Updates - Bosch Kiox BUI330 Instrucciones De Servicio

Activity tracking

In order to record activities, you must be registered with and
logged into the eBike Connect portal or the eBike Connect
app.
To record activities, you must consent to the storage of your
location data in the portal and/or in the app. Without this,
your activities will not be shown in the portal or the app.
Your position is only recorded if the on-board computer is
connected to the eBike Connect app.
eShift (optional)
eShift is the integration of electronic gear-shifting systems
into the eBike system. The eShift components are electric-
ally connected to the drive unit by the manufacturer. The
separate operating instructions describe how to operate the
electronic gear-shifting systems.
eSuspension (optional)
eSuspension is the integration of electronic shock absorp-
tion and suspension elements into the eBike system. You
can use the Quick Menu to select predefined settings for the
eSuspension system.
For details of these settings, please refer to the operating in-
structions provided by the eSuspension manufacturer.
eSuspension is only available in combination with the Kiox
on-board computer and can only be used with the BDU450
CX, BDU480 CX and BDU490P drive units.
ABS – anti-lock braking system (optional)
If the wheel is fitted with a Bosch eBike ABS with no external
control lights, the control lights will be shown on the Kiox
display when the system starts and in the event of a fault.
For detailed information on the ABS and how it works,
please refer to the ABS operating instructions.
Lock (premium function)
The Lock function is available to purchase from the <Shop>
in the eBike Connect app. Once the Lock function is
switched on by disconnecting the on-board computer, the
eBike drive unit assistance is deactivated. It can only then be
activated using the on-board computer belonging to the
eBike.
Detailed operating instructions can be found online at
www.Bosch‑eBike.com/Kiox‑manual.

Software updates

Software updates are transferred to the on-board computer
in the background of the app as soon as it is connected to
the app. When an update is complete, this will be displayed
the next three times the on-board computer is restarted.
Alternatively, you can check in the <Sys settings> whether
an update is available.
Powering external devices via the USB port
The USB port can be used to operate or charge most devices
that can be powered via USB (e.g. various mobile phones).
Bosch eBike Systems
Charging requires the on-board computer to be mounted
and a sufficiently charged battery to be inserted in the eBike.
Open the protective cap (17) for the USB port on the on-
board computer. Use a Micro-A – Micro-B USB charging
cable (available from your Bosch eBike dealer) to connect
the USB port on the external device to the USB port (6) on
the on-board computer.
Once the electrical load has been disconnected, the USB
port must be carefully resealed with the protective cap (17).
USB connections are not waterproof. When cycling in the
rain, do not connect any external devices and make sure
that the USB port is fully sealed by the protective
cover (17).
Important: If electrical loads are connected, this can affect
the range of the eBike.
English – 5
1 270 020 XBK | (17.03.2020)