Televes DVB S2-QAM Manual De Instrucciones página 39

User manual
Once the scan is complete, the list of servi-
ces will be shown, indicating the order num-
ber, the service_id and total number of ser-
vices found.
The user may select the services they wish
to eliminate from the output transport stre-
am. To do so, he can select for each servi-
ce:
ON: the service is not eliminated, and will
therefore be available at the output
OFF: the service is eliminated at the output.
"NA" (Not Available) is entered as the
service name in the output transport
stream.
SERVICE
1/5 01571
FASHION TV
ON
e. Display menu 1
This menu shows the C/N(dB) estimations
and the input level (dBm). PROVISIONAL.
MONITOR >>
C/N: 4.5dB
L.M.: 4.3dB
This is a read-only menu, meaning that the
neither the or or
keys are operati-
ve.
f. Display menu 2
This menu shows an indication of both
current temperature of the unit and maxi-
mum registered. The user can reset the
maximum by pressing key
.
MONITOR
Act: 05
Max: 07
reset
The recommended operating ranges are as
follows:
Optimal operating conditions : 0-6
High temperature: 7-8
Excessive temperature: 9-10
39
DVB S2-QAM TS-PROC
In the event the maximum recorded is outsi-
de the optimal range, the installation should
be altered with a view to reducing the tem-
perature. If you have installed QPSK-PAL
modules into cabinet ref. 5069 and the tem-
perature of any of the modules is out of the
optimum operation, you must install the
ventilation unit ref. 5334.To check on the
effectiveness of this change, you can reset
the maximum and check variation over time.
5.2.- EXTENDED MENU
By pressing the key for more than three
seconds, you can access a series of options
that are less frequently used and that are
called extended menus.
a. Configuration menu
Through this menu the address of the unit
can be selected (so that it can be controlled
by the Headend Controller CDC).
CONFIG
Dir CDC: 123