Televes DVB S2-QAM Manual De Instrucciones página 41

User manual
6.- DEVICE CONTROL
The DVB S2-QAM module can be configu-
red and monitored from a PC, using both
local and remote control.
a.- Local control
It is necessary to dispose of the "Headend
Management" program (v2.1.2 or upper) and
a special cable (provided with this program)
that connects a serial port from the to the
"PRGM" connector of the DVB S2-QAM.
Using the program you can configure and
read all the operation parameters, as well as
monitor the device.
b.- Remote control
It is necessary to dispose of a Headend
Control module (ref. 5051 or 5059) that
includes the previously-mentioned program,
and the corresponding modem connected
to the phone line.
Once communication has been established
with the headend control, it will be possible
to access all the controllable devices that
have been installed in the headend. In this
case, it is essential for each element to be
programmed with a unique device address
using the numbers between 1 and 254.
41
DVB S2-QAM TS-PROC