Descargar Imprimir esta página

essentiel b ERLV185-60miv1 Instrucciones De Uso página 19

Ocultar thumbs Ver también para ERLV185-60miv1:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

You have just purchased an Essentiel b branded product, and we thank
you for your purchase. We pay particular attention to the RELIABILITY,
EASE OF USE and DESIGN of our products.
We hope you will be completely satisfied with your new upright fridge.
unpacking
Remove the shipping box.
Check that the appliance has not been damaged during transport. Do not plug in a
damaged appliance under any circumstances! If the appliance is damaged, please
contact your retailer.
Remove all tape and packaging material on the inside and outside of the appliance.
Before first use
Clean the inside of the appliance with lukewarm water with a little white wine vinegar
added to it. Do not use soap or detergent as the odour may linger. After cleaning,
completely dry the appliance.
You can use white spirit to remove any remaining adhesive from the outside of the
appliance.
To clean the appliance, always unplug it, remove the fuses or switch off the
circuit breaker.
installation
Installation location
Place your fridge on a stable, level surface. Your appliance will be heavy when loaded
with food: it must, therefore, be placed on a strong, solid floor.
The appliance must be installed in a dry, well-ventilated room at room temperature
(10°C minimum and 43°C maximum).
The appliance should not be exposed to direct sunlight.
The appliance must not be exposed to rain.
The appliance must not be installed next to a radiator, a stove or any other heat
source.
The appliance's energy consumption and efficient operation are affected by the
room temperature.
19

Publicidad

loading