Descargar Imprimir esta página

Volvo Penta Neutra-Salt Instrucciones De Montaje página 4

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
Kit Purpose
This kit contains parts to install a Neutra-Salt Engine Flushing System to the marine engine cooling system.
Kit Contents (PN 3808823)
Item #
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
a. The contact plate is also available in white (PN 3862898) and wood grain (PN 3862900).
Tools Required
Standard socket set
Screwdriver or nut-driver set
Diagonal cutters
Power drill and bits
Power saw and blades
1.5 in. Hole saw
Test light
WARNING! THIS PROCEDURE MUST BE CARRIED OUT WITH THE BOAT OUT OF THE WATER.
FAILURE TO REMOVE THE BOAT FROM THE WATER WILL RESULT IN FLOODING OF THE BOAT.
CAUTION! The Neutra-Salt solution will freeze, which may damage the system. If freezing condi-
tions are possible, drain the engine after the procedure is complete. The solution will continue to
provide corrosion protection for the engine after it is drained. For winter storage, completely drain
the system. If freezing conditions are possible and the boat is still being used, make sure the reser-
voir is no more than 3/4 full.
CAUTION! The Neutra-Salt solution is biodegradable and is harmless to marine life. However some
localities prohibit any type of overboard discharge. The user should check local regulations before
using the Neutra-Salt system or before disposing of the Neutra-Salt solution.
CAUTION! The Neutra-Salt system is only intended for use in engines that operate in salt or brack-
ish water. It is not intended for engines used in fresh water.
WARNING! Neutra-Salt concentrate may cause eye irritation. In case of contact, flush eyes thor-
oughly with water for at least 15 minutes. If irritation persists, get medical attention.
2
Clamp, 3/8"
Clamp, 1-1/4"
a
Contact Plate
Decal, "Read Before Use"
Harness, Fused
Harness, Solenoid
Hose, 10 ft. (3 m)
Neutra-Salt, 1 Quart
Reservoir Assembly
Solenoid Valve
Switch, Rocker
Tee, 1"
Tee, 1-1/4"
Tie Strap
Hardware Required
Lag Screws (to attach reservoir bracket to boat)
Lag Screws (to attach solenoid bracket to boat)
Screws (to attach contact plate to boat)
Part #
Qty
3860413
3853786
3862899
7741899
3862489
3862490
3587529
41103103
3808878
3808911
3862491
3589414
3589415
948211
VPA 47702052 11-2011
4
2
1
2
1
1
1
1
1
1
1
1
1
6

Publicidad

loading

Este manual también es adecuado para:

21733731