Publicidad
Idiomas disponibles
Idiomas disponibles
EXTRACTOR BLADE:
DO NOT REMOVE THE
•
GASKET
permanently damage the
Extractor Blade and cause
leakage. If after washing as
indicated above additional
disinfecting is desired,
you may rinse with a 10%
vinegar/water solution or
with lemon juice. If, over
time, the gasket becomes
loose or damaged, you may
order a new Extractor Blade
at nutribullet.mx or contact
Customer Service.
• Dry the Extractor Blade
completely. It is helpful to
turn the blade on its side in
your dish drainer to ensure
BOTH SIDES of the Extractor
Blade are completely dried.
NUTRIBULLET
& TO-GO LIDS:
• These items are all
RACK
dishwasher safe. We
recommend rinsing them
and giving them a quick
brush with a dish brush to
remove any dried debris
before washing them in the
dishwasher.
sanitize cycle to wash the
cups as this may warp the
plastic.
• Regularly check the 3 tabs
on the side of the cup
(cracking, crazing, breakage
or rounding). If damaged,
16
as this will
CUPS
®
TOP
NEVER
use the
replace immediately to
prevent possible personal
injury.
NEVER USE A CUP WITH A
•
BROKEN, DAMAGED, OR
MISSING TAB AS DOING SO
MAY CAUSE THE CUP AND
MOTOR BASE TO SEPARATE
EXPOSING THE BLADE
ASSEMBLY!
STUBBORN CLEAN UP:
• If ingredients dry inside the
nutribullet
Cup, make your
®
cleanup a snap by filling the
cup about 2/3 full with room
temperature (21°C/70°F or
less) water and screw on
the Extractor Blade. Place
the cup/Extractor Blade
assembly on the nutribullet
Motor Base for about 20-30
seconds. This will loosen the
stuck ingredients, and with a
light scrub and rinse, you'll
be all finished.
Replacement parts.
To order additional parts and
accessories, please visit our
nutribullet.mx/
website at
shop/accessories
to contact Customer Service:
800-nbullet.
®
or feel free
Publicidad
