Techno Line WS6446 Manual De Instrucciones página 14

radio-controlled time signal, the "DST" icon does not disappear unless it received no DST
signal.

If there is no signal or too much interference the receiver will only be on for 2 minutes.

If the signal is good the reception will finish in 2-3 minutes.

If the signal is weaker the reception will run for up to 10 minutes.
Manual reception of DCF:

In normal display mode, press the RCC button to on/off time signal search. The DCF
reception icon will be flashing while the reception of the DCF signal is active and the icon will
no longer be displayed when the reception is turned off.
Manual setting:
- Press and hold the MODE button in normal display mode to enter setting mode:

24/12-HOUR: 24Hr will flash. Press the + or - button to select the 24-hour or 12-hour time
display. Press the MODE button to continue.

Time zone: Time zone will display and the selected time zone will blink. Press the + or - button
to set the time zone( setting range is 0~+12,0~-12, German time is 00 and UK time is -01 ).
Press the MODE button to continue.

HOURS: The hour will flash. Press the + or - button to select the hour. Press the MODE button
to continue.

MINUTES: The minutes will flash. Press the + or - button to select the minutes. Press the
MODE button to continue.

YEAR: The year will flash. Press the + or - button to select the year. Press the MODE button to
continue.

MONTH: The month will flash. Press the + or - button to select the month. Press the MODE
button to continue.

DATE: The date will flash. Press the + or - button to select the date. Press the MODE button to
continue.

LANGUAGE: Language for weekday will display, the default is GER. Press the + or - button to
select the language: English (ENG), German (GER), French (FRE), Italian (ITA), Dutch (DUT),
Spanish (SPA), Danish (DAN). Press the MODE button to continue.

°C/°F: The °C or °F will flash. Press the + or - button to select the temperature unit. Press the
MODE button to confirm and exit setting.
Notes:

If no buttons are pressed in a 20 seconds period, set mode will time out and return to live