Publicidad
Idiomas disponibles
Idiomas disponibles
2.2 Levelling feet
Schematic diagram of the leveling feet
(The picture above is only for reference. The actual configuration will depend
on the physical product or statement by the distributor)
Adjusting procedures:
a. Turn the feet clockwise to raise the refrigerator;
b. Turn the feet counterclockwise to lower the refrigerator;
c. Adjust the right and left feet based on the procedures above to a
horizontal level.
2.3 Door Right-Left Change
Tools to be provided
Wrench
Not level
When the fridge door is low:
Open the door, use a wrench to loosen the locking nut and to rotate the
adjusting nut anti-clockwise to raise the height of the door. Once the
doors are aligned, then tighten the locking nut by rotating it anticlockwise.
When the fridge door is high:
Open the door and turn the adjusting nut clockwise to lower the door and
when aligned, tighten the locking nut counterclockwise.
Fixed shaft
Levelling feet
Locking nut
(The picture is only for reference. Actual
configuration depends on the physical product.)
10
Adjusting nut
Right
Wrench
V.2
Publicidad
