Publicidad
Idiomas disponibles
Idiomas disponibles
If using the drum mandrel:
-
Align appropriate sized sanding drum over mandrel and push down to
completely cover drum end of mandrel.
-
Insert the slot end of the provided wrench into the slot on top of the
mandrel and tighten the screw on the drum mandrel head to expand the
drum and securely hold the sanding drum in place(Figure 8).
If using the screw mandrel:
-
Align desired accessory hole with mandrel screw head.
-
Screw accessory onto mandrel by twisting clockwise until secure(Figure 9).
Balancing Accessories
For precision work, it is important that all accessories be properly balanced. To balance an accessory, slightly loosen the collet nut and give the
accessory or collet a 1/4 in. turn. Retighten collet nut and run the rotary tool. You should be able to tell by the sound and feel if the accessory is
running in balance. Continue adjusting in this fashion until the best balance is achieved. Replace accessories if they become damaged or
unbalanced.
Shield Rotary Tool Attachment
The rotary shield attachment provides a clear and simple solution for redirecting debris and sparks away from the user without interfering with the
task at hand. The tool shield can be used with right- or left-hand grip positions and works to deflect debris on a variety of applications, including
cutting, sanding, grinding and polishing. The shield can be quickly adjusted into position, provides easy access to the accessory without interfering
with the workpiece.
Installation Instructions:
Step 1. Remove the housing cap A from the end of the tool and set housing cap aside. The original housing cap must be reinstalled when this
attachment is not used (Fig.10).
Step 2. Screw the Shield onto the tool using the lock nut B (Fig.11).
Step 3. Position the Shield such that it will redirect debris, sparks, and dust away from the user using the positioning tabs C (Fig.12).
Fig.8
- 17 -
Fig.9
Publicidad
