Elcometer SAGOLA HT 10 Manual De Instrucciones página 28

Fluid pressure scheme
MODEL RATIO
HT 10 10:1
HT 15 15:1
HT 25 25:1
Equipment identification
The equipment is provided with the manufacturer's identification plate, shown in the picture
below. For no reason must the plate be removed, even if the equipment must be re-sold. For
any communication with the Sagola always refer to the serial number written on the plate itself.
an Elcometer company
Urartea 6, 01010 Vitoria. Made in Spain
05. Components
1 Suction Probe (Fig. 1)
2 Product return hose (Fig. 3)
3 Product return key (Fig. 3)
4 Pressure Regulator (Pump) (Fig. 3)
5 Pressure Regulator (Gun) (Fig. 3)
6 Product Outlet (Fig. 3)
7 Pressure Gauge (Pump) (Fig. 3)
8 Pressure Gauge (Gun) (Fig. 3)
9 Air inlet (Fig. 3)
10 Product inlet (Fig. 3)
11 Wall support (OPTIONAL) (Fig. 2)
12 Horizontal double bellows (Fig. 4)
Air inlet pressure
3 bar/ 43.5 psi / 0.3 MPa
6 bar/ 87 psi / 0.6 MPa
3 bar/ 43.5 psi / 0.3 MPa
6 bar/ 87 psi / 0.6 MPa
3 bar/ 43.5 psi / 0.3 MPa
6 bar/ 87 psi / 0.6 MPa
Mod.
Nº Serie
Fig.02
ENGLISH
Product outlet pressure
33 bar/ 478.6 psi / 3.3 MPa
66 bar/ 957 psi / 6.6 MPa
41 bar/ 594.6 psi / 4.1 MPa
82 bar/ 1,189 psi / 8.2 MPa
74 bar / 1,073 psi / 7.4 MPa
148 bar / 2,146 psi / 14.8 MPa
Fig.01
1
11