Wiesenfield WIE-EF-200 Manual De Instrucciones página 17

A. Controller
B. Hanger for vertical installation
C. Active voltage indicator
D. 2-piece grounding pin "-"
E. Power cable with clamps - for battery power
F. Power supply - for power supply from the socket
G. Power connection to the fence ("+")
H. Ground wire (for the "-" ground pin)
3.2.
Preparation and operation of the device
POSITIONING OF THE UNIT
Keep the controller away from any hot surfaces and direct sunlight. Place the unit
in such a way that the mains plug can be reached at any time. Ensure that the power
supply to the unit corresponds to that specified on the identification plate! Although
the controller housing is water-resistant (IPX6), it does not mean that it is
waterproof. It should be placed so that contact with moisture is reduced to a
minimum, e.g. by mounting it in a closed box, out of the reach of animals,
unauthorized persons or children.