Publicidad
Idiomas disponibles
Idiomas disponibles
5. PREPARING FOR
MEASUREMENT
Inserting/changing batteries:
1. Push the tab on the middle of the Battery Compartment
Cover to remove it from the bottom of the device.
2. Insert two AAA alkaline batteries (included) according to
the polarity markings inside the compartment.
NOTE: Do not use rechargeable batteries.
3. Reattach the Battery Compartment Cover.
4. "
" will flash. Set the hour format, date and time as
described below. Any saved measurements will be
retained.
1
Setting the hour format, date, time, Bluetooth
connectivity, and default user number:
If date and time are not set, stored measurements will not
have a valid timestamp associated with them.
2
3
NOTE: Press and hold the M1 or M2 Buttons to advance
values rapidly.
Before first use and after every battery
change:
When you insert batteries into the device, you will
automatically arrive at the relevant menu.
If batteries have already been inserted:
STOP Button for 5 seconds.
1. Select an hour format (12 or 24 hour
display) with the M1/M2 Buttons and
press the START/STOP Button to confirm.
2. The year flashes on the LCD Display. Set
the year with the M1/M2 Buttons and
press the START/STOP Button to
confirm. .
3. The month flashes on the LCD Display. Set
the month with the M1/M2 Buttons and
press the START/STOP Button to confirm.
4. The day flashes on the LCD Display. Set the
day with the M1/M2 Buttons and press the
START/STOP Button to confirm.
10
START/
Publicidad
