Descargar Imprimir esta página

Proline PCD 7 ELECTRO Manual De Instrucciones página 32

Publicidad

Idiomas disponibles

Idiomas disponibles

GB
Mini.
BEFORE INSTALLING THE APPLIANCE
Before connecting your dryer to the power supply, check that the
voltage stated on the rating label of your appliance corresponds to
the voltage in your home. A different voltage could damage the
appliance.
The plug is the only way to unplug the appliance and should therefore
be accessible at all times. To turn off main power to the appliance, turn
it off and then detach the plug from the outlet.
The appliance must be grounded. The manufacturer is not responsible
for damages that may occur as a result of usage without grounding.
INSTALLATION
- It is recommended that, for your convenience, the appliance is
positioned close to your washing machine.
- The appliance must be installed in a clean place, where dirt does not
build up.
- The appliance should not be located near a gas hob, cooker, heater or
grill, as flames from the burners could damage it.
- When installing the appliance, make sure that the power cord is not
trapped or twisted.
- The appliance is best operated between 5°C and 35°C. Outside this
temperature range, performances may be affected.
- For better drying performance, keep the rear of the
appliance away from the wall.
- The appliance must not be installed behind a lockable
door, a sliding door or a door with hinges on the
opposite side to that of the tumble dryer, in such a way
that a full opening of the tumble dryer door is restricted.
- To keep vibration and noise to a minimum when the
dryer is in use, it should be placed on a firm, level surface.
Mini.
31

Publicidad

loading