Berner BACAG-1 BL 18V 01 Manual Original página 27

BRAKING SYSTEM
The run-on brake engages when the trigger is released, causing the
tool to stop within seconds.
Make sure that the insertion tool comes to a complete stop before
laying it down.
In comparison with tools without a run-on brake the run-on time will be
highly reduced by braking.
CLEANING
The ventilation slots of the machine must be kept clear at all times.
MAINTENANCE
Use only Berner accessories and Berner spare parts. Should
components need to be replaced which have not been described,
please contact one of our Berner service agents (see our list of
guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state
the ten-digit No. as well as the machine type printed on the label and
order the drawing at Berner.
SYMBOLS
Please read the instructions carefully before starting
the machine.
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any work on
the appliance.
Do not use the guard for cut-off operations.
Do not use force.
Use force.
Always wear goggles when using the machine.
Wear ear protectors.
Wear a suitable dust protection mask.
Wear gloves!
Always operate with two hands.
Only for grinding.
457 728 - Berner-BACAG-1 BL 18V.indd 27 457 728 - Berner-BACAG-1 BL 18V.indd 27
Only for cutting work.
Pay attention to permissible disc thickness.
Accessory - Not included in standard equipment,
available as an accessory.
Do not dispose electric tools, batteries/rechargeable
batteries together with household waste material.
Electric tools and batteries that have reached the end
of their life must be collected separately and returned
to an environmentally compatible recycling facility.
Check with your local authority or retailer for recycling
advice and collection point.
n
Rated speed
0
V
Voltage
Direct Current
European Conformity Mark
GUARANTEE AND GUARANTEE SERVICE
Each tool, spare part or accessory is consistently checked before
being dispatched from the manufacturing plant. If, despite this fact,
there are any defects, please send the item directly to our Client
Services Headquarters or to the nearest service repair shop of the firm
Berner.
The warranty period of 36 months for tools and 12 months for batteries
and chargers starts on the date of purchase which must be verifi ed
using the original receipt. During the guarantee period the producer
guarantees:
• free removal of possible defects;
• free replacement of all damaged parts;
• free professional servicing.
The requirement for this is that the problem is a material and/or
manufacturing fault. Defects or faults caused by incorrect treatment or
excessive force are not covered by the warranty. Furthermore, only
original accessory parts may be used, which Berner has expressly
identifi ed as suitable for the operation with Berner machines.
You can fi nd out the location of your nearest customer service
workshop under www.berner.eu.
27 ENGLISH
22.05.2021 13:38:53 22.05.2021 13:38:53