NexPow T11F Manual página 6

Apart from jump starting a car, this product can also supply power for a mobile
phone, PSP, MP3/MP4, camera and other consumer electronics, and with
different lighting modes.
Jump Start A
car
How to Start Vehicle When Battery is Flat?
Operating Instructions:
Turn on the function button and make sure it is over 40% charged. If the power is less than 40%, it
may not be able to start your engine.
Step 1:
Connect the jumper cable to the jump
starter. If the indicator light of jumper
cable is solid blue, the clamp cable is in
standby status. Now the jump starter is
ready for jump-starting.
Step 3:
When the indicator light of jumper cable is
solid green and blue, you can try to start
your vehicle.
Charge PSP
Charge Cell Charge Camera
Phone/Tablet
Step 2:
Connect the clamp to the car battery.
Connect the red clamp cable to positive
and the black clamp cable to negative.
Please avoid reverse connection.
Step 4:
After jump-starting the engine, remove
the battery clamp from the car battery,
then remove the clamp plug from the
jump starter.
Outdoor Travel
/Video Flashlight