Publicidad
Idiomas disponibles
Idiomas disponibles
Smart Jumper Cable Instruction
1) Connect the plug fully seated into the host.
2) Connect the clamps to the vehicle battery. Red clamp to
positive polarity (+), black clamp to negative polarity (-).
3) Press the car start button or turn the ignition switch to the
START position.
4) This jumper cable is designed with advanced protection of
indicator light and buzzer.
The
blue
light is on.
It means the jumper cable connected to the
jump starter is correct and ready to connect
to the car battery.
The
green
light and the
will be on.
It means all connection is correct, and you
can start the engine.
The
blue
light is on.
After the car has started, remove the jumper
cable.
blue
light
Publicidad
