EHEIM streamON+ 3500 Manual De Instrucciones página 28

English
4. Using a brush, clean all components under running
water. Remove lime scale deposits with 10 % citric acid
5. Install the pump again in reverse order.
When assembling, make sure that the washer disc ⑨ is
correctly inserted into the motor housing.
streamON+ 6500 / 9500 (⌦G)
1. Press both latches simultaneously and remove the
pump basket ⑧ from the motor housing.
2. Pull the power controller ⑦ out of the motor housing.
3. Pull the impeller ⑩ out of the motor housing.
4. Using a brush, clean all components under running
water. Remove lime scale deposits with 10 % citric acid
5. Install the pump again in reverse order.
When assembling, make sure that the bearing bushings ⑪
are inserted correctly in the pump basket and in the motor
housing.
Clearing faults
DANGER! Electrocution!
▶ Before clearing faults, remove the mains plug of the
pump.
Faults
Pump does not
start
Possible cause
No mains voltage
28
Remedy
▶ Check the mains
voltage
▶ Check the supply
line