Connections - Omnitronic UHF-215 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Microphone
1. Microphone Grille
Protects capsule and prevents „pop" noise.
2. Antenna
3. Battery Indicator
When this light glows permanently, change the battery.
4. ON / MUTE / OFF-Switch
Mute the microphone to prevent sounds from being transmitted to the receiver
To conserve the battery, turn off the microphone when not in use.
5. Battery Cover
Replace the cover for access to the battery and Dip switches.
6. Dip Switches
Select the desired channel via the DIP-switches. Set the same channel as with the receiver.

5. CONNECTIONS

Connect the wireless receiver via the audio-output sockets with an input socket of your mixing console or
amplifier.
Use the balanced Audio output, when you connect the receiver to a mixer/amplifier with a balanced input.
Use the unbalanced Audio output, when you connect the receiver to the LINE input of an amplifier.
Adjust the antenna vertically.
Plug the connection cable of the power-unit with the DC IN-socket. Plug the power unit into your outlet.
16/36
00024570.DOC, Version 1.2

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Uhf-400

Tabla de contenido