Metra 95-7861 Instrucciones De Instalación página 3

Note: Select the proper radio housing for your
vehicle. EX models use the (EX) Double DIN
Trim Plate and (EX) brackets. LX models use
the (LX) Double DIN Trim Plate and
(LX) brackets
1. Clip the radio brackets onto the radio
trim panel. (Figure A)
2. Slide the radio into the bracket/radio
trim panel assembly, and then secure
using the screws supplied with the radio.
(Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Test the radio for proper
operation.
4. Reassemble the dash in reverse order
of disassembly.
KIT ASSEMBLY
(Figure A) (Figure B)
REV. 4/19/2022 INST95-7861
3