Cleanmaxx CHAMP Manual De Instrucciones página 11

Roller brush/brush head
Illustration H
Note
If necessary, remove the brush cover
(see "Cleaning the roller brush").
Motor not running
No electrical voltage present
 Check the socket and the power
supply fuse.
 Check the power cord and the pow-
er cord plug of the device.
The thermal protection switch has
switched off the motor due to overheat-
ing
 Replace the clogged filter or remove
the blockage from the suction hose.
 Allow the device to cool down.
Rattling noise when switching off
Note
The roller brush is equipped with a slip
clutch that releases when excessively
large or blocking objects are sucked in.
Note
The coupling only engages again when
the device is switched off, which results
in a loud rattling noise.
 Check the roller brush for blocking
objects and remove these if present.
The noise is no longer present when
the device is switched on again.
Unsatisfactory vacuuming result
 Check the roller brush for blocking
objects and remove these if present.
 Remove blockages from the brush
head, suction pipe and suction
hose.
 Replace the filter bag.
 Replace the exhaust filter or motor
protection filter.
 Set the carpet height selection knob
to the correct setting.
 Replace the roller brush.
Red indicator light lights up
 Remove blockages from the brush
head, suction pipe and suction
hose.
 Replace the filter bag.
Customer Service department
If the malfunction cannot be corrected,
the device must be checked by the
Customer Service department.
Please visit CleanMaxVacuums.com
to obtain warranty information and reg-
ister your new vacuum.
Accessories and spare parts
Only use original accessories and orig-
inal spare parts. They ensure that the
appliance will run fault-free and safely.
For additional information about acces-
sories and spare parts, please go to
CleanMaxVacuums.com or the retailer
in which you purchased the unit.
English
Warranty
11