Publicidad
Idiomas disponibles
Idiomas disponibles
Twist lock of the brush cover
22
Carpet height selection button
23
Filter cover
24
Main switch
25
Suction pipe
26
Suction hose
27
Handle
28
Power cord
29
Symbols on the appliance
Setting for high-pile carpets
Setting for low-pile carpets
Preparation
Illustration B
Unpack the device.
1. Lock the brush head.
2. Mount the handle.
3. Mount the suction hose and insert
the suction pipe into the holder.
4. Wind up the power cord.
5. Adjust the handle.
6. Mount accessories.
Startup
Installing the filter bag
1. Unlock and remove the filter cover.
2. Turn the filter bag lock to the right to
unlock.
Illustration C
3. Insert the filter bag and turn the filter
bag lock to the left to lock.
4. Fit and lock the filter cover.
Operation
Switching on the device
1. Connect the power cord plug.
2. Switch on the device at the main
switch.
Cleaning mode
Roller brush operation
1. Adjust the carpet height using the fi-
bre height selection knob on the
brush head.
2. Perform cleaning.
Suction pipe operation
Illustration D
ATTENTION
Danger due to rotating roller brush
Risk of damage
Do not set the brush head with the ro-
tating roller brush to the high-pile car-
pet setting when vacuuming using the
suction hose. The carpet could be
damaged or destroyed if the rotating
brush remains in the same position for
a longer period of time.
Switching off the device
1. Switch off the device at the main
switch.
2. Pull out the power cord plug.
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during transportation.
1. Wind the power cord around the
cord storage.
2. Carry the device by the carrying
handle.
3. When transporting the device in ve-
hicles, secure it to prevent it from
slipping or overturning in accord-
ance with the respective valid guide-
lines.
English
Transport
9
Publicidad
