Publicidad
Idiomas disponibles
Idiomas disponibles
211859_s1_s3-5059340186696-C&L-A5-IM-Easy-V01-Multi.pdf, Cycle:1, Status:Approved
Use
Operation
Start cooking
Touch the On / Off "
will beep once, all displays will show "–" or "– –". The hob is in
standby and ready to use.
Place a suitable pan on the cooking zone that you wish to use.
Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
Touch the heating zone selection control, and an indicator
next to the key will flash "0" for five seconds.
Adjust the power using the slider control
•
Ensure you choose a power level within one minute of
switching on the hob.
•
The power level can be adjusted at any time.
If the display flashes
•
you have not placed a pan on the correct cooking zone or,
•
the pan you're using is not suitable for induction cooking or,
•
the pan is too small or not properly located on the cooking zone.
NOTE: Unless there is a suitable pan correctly placed on a cooking zone, the hob will not operate and
automatically switch off after one minute.
211859_s1_s3-5059340186696-C&L-A5-IM-Easy-V01-Multi.indd 28
211859_s1_s3-5059340186696-C&L-A5-IM-Easy-V01-Multi.indd 28
Printed by Fang Yuan, 18/03/2021 03:03:03
" control for one second and the hob
alternately with the heat setting, this means that:
28
13-01-2021 08:30:37
13-01-2021 08:30:37
page 29 of 98 pages
Publicidad
