Publicidad
Idiomas disponibles
Idiomas disponibles
EN
If during steam cleaning the orange water level indicator light (6) comes ON, the
water level is too low and a re-fill is necessary.
In this case
1. Disconnect TUTTOSTEAMY following the instructions in point 5 of chapter 9
"Disconnecting TUTTOSTEAMY".
2. Turn the steam intensity regulator knob (10) to position 0.
3. Let the device cool. Current steam pressure is shown on pressure indicator (8).
As soon as device reaches again normal pressure again, safety valve (9) can
be opened (picture J).
10 - WATER RE-FILL
4. Unscrew the safety valve (9) anti-clockwise
5. Pour a suitable quantity of water (min. 0.5 l – max. 1.6 l).
higher precision.
6. Screw safety valve back – clockwise. Ensure that safety valve is properly
closed/tight.
7. Press the main switch (4), orange light comes on (4B)
8. Press heating switch (5) and heating begins. Green indicator light (5B)
comes on when heating process is finished. Parallel pressure indicator (8)
starts to show current steam pressure.
9. When green heating indicator (5B) is on, steam can be released.
10. TUTTOSTEAMY is now fully ready and can be used again.
J
NOTE: TUTTOSTEAMY is equipped with a safety valve that prevents the
valve from opening as long as steam pressure is high.
12
Use a funnel
for
Publicidad
