Publicidad
Idiomas disponibles
Idiomas disponibles
1
Precautions for safety
The manufacturer shall not assume any liability for the damage
caused by not observing the description of this manual.
WARNING
General
• Before starting to install the air conditioner, read through the
Installation Manual carefully, and follow its instructions to install the
air conditioner.
• Only a qualified installer or service person is allowed to do
installation work. Inappropriate installation may result in water or
refrigerant leakage, electric shock or fire.
• Do not use any refrigerant different from the one specifled for
complement or replacement. Otherwise, abnormally high pressure
may be generated in therefrigeration cycle, which may result in a
failure or explosion of the product oran injury to your body.
• Before opening the electrical control box cover of the indoor unit,
set the circuit breaker to the OFF position. Failure to set the circuit
breaker to the OFF position may result in electric shocks through
contact with the interior parts. Only a qualifi ed installer or qualified
service person is allowed to remove the electrical control box cover
of the indoor unit and do the work required.
• Before carrying out the installation, maintenance, repair or removal
work, set the circuit breaker to the OFF position.
Otherwise, may result in electric shocks.
• Place a "Work in progress" sign near the circuit breaker while the
installation, maintenance, repair or removal work is being carried
out. There is a danger of electric shocks if the circuit breaker is set
to ON by mistake.
• Only a qualified installer or qualified service person is allowed to
undertake work at heights using a stand of 19.7" (50 cm) or more or
to remove the intake grille of the indoor unit to undertake work.
• Wear protective gloves and safety work clothing during installation,
servicing and removal.
5-EN
– 3 –
• Do not touch the aluminium fin of the unit. You may injure yourself
if you do so. If the fin must be touched for some reason, first put on
protective gloves and safety work clothing, and then proceed.
• When work is performed at heights, use a ladder which complies
with the ISO 14122 standard, and follow the procedure in the
ladder's instructions. Also wear a helmet for use in industry as
protective gear to undertake the work.
• Before cleaning the filter set the circuit breaker to OFF without fail,
and place a "Work in progress" sign near the circuit breaker before
proceeding with the work.
• Before working at heights, put a sign in place so that no-one will
approach the work location, before proceeding with the work. Parts
and other objects may fall from above, possibly injuring a person
below. While carrying out the work, wear a helmet for protection
from falling objects.
• The refrigerant used by this air conditioner is the R410A.
• The air conditioner must be transported in stable condition.
If any part of the product is broken, contact the dealer.
• When the air conditioner must be transported by hand, carry it by
two or more people.
• Do not move or repair any unit by yourself. Must be done by
qualified installer or qualified service person. Special precaution
should be taken when removing the cover for the unit to avoid
electtic shock from high voltage lines.
• To transport the air conditioner, wear shoes with additional
protective toe caps.
• To transport the air conditioner, do not take hold of the bands
around the packing carton. You may injure yourself if the bands
should break.
• This appliance is intended to be used by expert or trained users in
shops, in light industry, or for commercial use by lay persons.
6-EN
Publicidad
