Siemens SIRIUS 3TK2826-1 Serie Instructivo página 6

3TK2826 - device restart
START
Switch off
supply voltage
Set configuration via DIP
switches and delay time
via potentiometer
Switch on
supply voltage
All configuration LEDs ON
for approx. 1 s (LED test)
All configuration LEDs OFF
for approx. 0.5 s
Configuration LEDs ON
according to set configuration
Configuration
OK?
Yes
Confirmation:SET/RESET
Press button for approx. 2 s
Configuration LEDs flashing
according to set configuration
Check configuration
Configuration
OK?
Yes
Confirmation: SET/RESET
Press button for approx. 1 s
Configuration LEDs OFF
for approx. 0.5 s
Configuration LEDs ON for
approx. 2 s acc. to configuration
Configuration and delay time
accepted.
Device switches into protection
mode
6
No
LEDs of the falsely set
DIP switches flicker
Set correct configuration
and press SET/RESET
for approx. 5 s
No
3TK2826 - display the configuration
Confirmation: SET/RESET
Press button briefly
All configuration LEDs ON
for approx. 1 s (LED-Test)
All configuration LEDs OFF
for approx. 0.5 s
Configuration LEDs ON according to
configuration for approx. 5 s
Configuration LEDs OFF
3TK2826 - RESET in event of fault
Confirmation: SET/RESET
Press button for 5 s
Device restart
3ZX1012-0TK28-4EA1