INVENTOR QLT-700 Manual Del Propietário página 13

Cleaning of the filter components
1
When the last bar of the progress bar
turns red and the cleaning indicator light
is on, it prompts that the Pre-Filter needs
to be cleaned.
Outlet
Great Good Med Poor
Gaseous Pollutant
Great Good Med Poor
HEPA Filter Pre-Filter
2
Unplug the appliance, and take out the
Pre-Filter
Clean
3
Vacuum the dust or wipe it with a cloth.
4
If there is a lot of dirt, the common
kitchen detergents is diluted and used
first, and then do the cleaning.
EN
Clean
Pre-Filter
Soaking time is
about 10min.
5
Dry the Pre-Filter
6
Assemble the Pre-Filter
7
Plug in the appliance, and start it.
8
Long press the ION button for 3s, the
cleaning indictor light is off, and the Pre-
Filter is restored.
LIGHT
ION
(UV)
-Child Lock-
ION (Press 3s) ON/STAND-BY
PM2.5 Auto Sleep Turbo MODE
(UV) SPEED
LIGHT PM2.5 ION
(UV)
13