INVENTOR QLT-700 Manual Del Propietário página 14

Replacement of the filter components
1
Filter model: QLT-700-F (includes 2)
2
When the last bar of the progress
bar turns red and the replacement
indicator light is on, it prompts
that the HEPA Filter needs to be
replaced.
Change
HEPA Filter
3
Take out the HEPA Filter
Notes
Never Wash the HEPA filter
Recommend to clean filter with a small soft brush or the use of a vacuum cleaner. In
the event of strong odor from cigarettes, barbecue, etc.,, the filter may produce a smell.
Please remove and clean the filter and air filter and allow 2-5 days prior to use. If the
smell persists, please replace the filter.
14
Outlet
Great Good Med Poor
Gaseous Pollutant
Great Good Med Poor
HEPA Filter Pre-Filter
4
Remove the protective film of the
filter
Change
Outlet
HEPA Filter
Great Good
Gaseous Pollutant
Great Good
HEPA Filter
5
After installing the new HEPA Filter
provided by the original factory, it can be
run with the machine and the HEPA Filter
will be reset automatically without any
other operation.
6
Under other circumstances, long
press the ION button for 3s, the
replacement indicator light is off, and
the HEPA Filter is restored.
LIGHT
Med Poor
Med Poor
Pre-Filter
ION
(UV)
-Child Lock-
(Press 3s) ON/STAND-BY
PM2.5 ION MODE
Auto Sleep Turbo SPEED
(UV)
LIG
EN