cecotec MICROONDAS PROCLEAN 6010 Manual De Instrucciones página 46

ENGLISH
Clock setting
On standby state, press Clock key.
Use number keys to enter the correct time. You must press at least three numbers to set the
clock (one for hour and two for minutes).
Press the Clock key again to confirm time.
Note: This is a 24-hour clock. When the microwave is first plugged in or when power resumes
after a power interruption, the display panel will show ENTER, CLOCK, TIME. If you prefer not to
have the clock displayed, press the Reset key. You can check the clock time while cooking is in
progress by pressing the Clock key.
Example: Setting clock at 12:30
Steps
1 After powering up, the display panel shows the colon sign.
Press the Reset button once or wait for 30 seconds.
2 Press keys "1", "2", "3", "0".
3 Press the Clock key to confirm.
Setting timer
You can use the timer function independently, even while the microwave is operating.
Press Timer key.
Enter cooking time by pressing the number keys. The timer is set in minutes and seconds, from
left to right. The maximum cooking time is 99 minutes, 99 seconds.
For example, to program:
5 seconds: Press 5.
24 minutes, 5 seconds: Press 2405.
Press the Start/Stop key to confirm.
Warning
The timer countdown can be seen in display for 3 seconds before it goes back to the stand by
mode.
Press Timer and then press Reset to cancel timer during countdown.
Setting cooking time and power level
One-stage cooking
From the home display, use the number keys to enter the desired cooking time. The cooking
time can be from 1 second to 99 minutes and 99 seconds. If the desired cooking time is more
than 1 minute, enter numbers for both minutes and seconds. For example: to set 20 minutes,
enter 2, 0, 0, 0.
Press the power button and set the desired power level using the number keys.
Press the Start/Stop key to start operation.
46 PROCLEAN 6010
Display
:
12:30