Publicidad
Idiomas disponibles
Idiomas disponibles
Storing the unit
-
When the unit is not used for a long period of time and you wish to
store it, please follow the steps below :
1. Empty the remaining water in the tank.
2. Fold up the power cord and put it in the water tank.
3. Clean the air filter.
4. Store in a cool, dry place.
INSTALLATION
Empty the water tank before each use of the appliance.
The appliance must remain in an upright position for at least 24 hours
before it is put into operation. This period must be observed if the appliance
has been transported.
When using the appliance, make sure that the doors and windows are
closed to prevent energy loss.
Install the unit in an upright position on a flat, stable and dry surface as
shown in the sketch below :
Observe the following minimum distances :
20 cm minimum on front / back and sides
71/78
Publicidad
