Home Decorators Collection FELDNER 56055 Guía De Uso Y Mantenimiento página 8

Assembly - Hanging the Fan
1
Attaching the fan to the
electrical box
WARNING: To reduce the risk of fire, electric shock
or personal injury, mount to an outlet box marked
"Acceptable for fan support of 35 lb (15.9 kg) or less",
and use screws provided with the outlet box.
NOTE: The slide-on mounting bracket (A) is designed
to slide into place on an outlet box with the outlet box
screws (GG) installed.
□
Loosen the two mounting screws (GG) in the outlet box.
□
Pass the 120-Volt supply wires through the center hole in the
slide-on mounting bracket (A).
□
Slide the slide-on mounting bracket (A) on to the mounting
screws (GG) and center the slide-on mounting bracket (A) in
relation to the outlet box. If necessary, use leveling washers
(not included) between the slide-on mounting bracket (A) and
the outlet box. The flat side of the slide-on mounting bracket (A)
should face toward the outlet box, as shown.
□
Securely tighten the two mounting screws (GG).
2
Hanging the fan
□
Carefully lift the fan motor assembly (E) up to the slide-on
mounting bracket (A).
□
Insert the ball portion of the ball/downrod assembly (B)
into the socket of the slide-on mounting bracket (A).
□
Turn the ball/downrod assembly (B) clockwise until the tab
of the slide-on mounting bracket (A) is aligned with the
slot in the ball.
A
Slot
Tab
8
B
A
B
C
JJ
D
E