SICK RAY10 Manual De Instrucciones página 38

OPERATING INSTRUCTIONS
11 Technical data
11.1 Electrical and mechanical data
Sensing range max. (with reflector P250F)
Light band dimensions / distance approx.
Minimum detectable object (MDO)
Suppression of objects
Minimum distance between sensor and reflector
Supply voltage U
B
Current consumption
Output current I
max.
Communication mode
IO-Link
Response time
Switching frequency
en
Enclosure rating
Protection class
Circuit protection
Ambient temperature, operation
1) To ensure reliable operation, it is recommended to use fine triple reflectors or reflective tape. Suitable reflectors and tapes can be found in
the SICK accessories range. Use of reflectors with large-scale triple structures can negatively influence functionality.
2) 16 VDC to 30 VDC, without load
3) 10 VDC to 16 VDC, without load
4) Signal transit time with resistive load in switching mode. Deviating values possible in COM2 mode.
5) With a light/dark ratio of 1:1 in switching mode. Deviating values possible in IO-Link mode.
6) A = U -connections reverse polarity protected
B
B = inputs and output reverse-polarity protected
C = Interference suppression
D = outputs overcurrent and short-circuit protected
38 O P E R A T I N G I N S T R U C T I O N S | RAY10
RAY10
0 ... 1.5 m 1)
37 * 12 mm / 1 m
≥ 5 mm
< 1 mm
300 mm
DC 10 ... 30 V
≤ 30 mA , < 50 mA
2) 3)
≤ 100 mA
COM2
1.1
≤ 0.5 ms 4)
1000 Hz
5)
IP67
III
A, B, C, D
6)
-40 °C ... + 60 °C
8022198.1G8F/2023-03-29 | SICK
Subject to change without notice