Frequently Asked Questions & Troubleshooting - INVENTOR PR1-ION10L Manual De Usuario

10. FREQUENTLY ASKED QUESTIONS
& TROUBLESHOOTING
Are dehumidifiers
costly?
Where should the
dehumidifier be
placed ideally?
Can the filter be
replaced by another
HEPA type filter?
Which is the
appropriate room
humidity level?
Why does
condensation persist
on windows even with
dehumidifier's use?
Why am I not able
to set the desired
humidity level by use
of the control panel?
EN
For about the first month of use, the dehumidifier
operates intensively. This will gradually decrease within
time, since the dehumidifier will have been calibrated in
its working environment. Condensed households may
sometime be significantly expensive to heat. The use of a
dehumidifier may lower energy costs.
For optimal results, it is suggested that the dehumidifier
is placed in a central area. Doors within the household
should be open in order for the dehumidifier to enhance
its operation.
The dehumidifier's filter cannot be replaced by any other
type of filter since it is specifically designed to operate with
this unit.
Maintaining a proper home humidity level is essential
for your well-being and that of your household. Extreme
fluctuations cause adverse effects on both; low humidity
may cause respiratory problems and damage on wooden
doors, windows, and furniture, and make you vulnerable
to electric shocks due to increased static electricity. On
the other hand, high humidity may promote mold growth,
serving as breeding grounds for various bacteria and
resulting in poor health and also a damaged home. The
ideal humidity levels fluctuate between 45% to 55%.
When the desired humidity level is reached, there is a
possibility of partial humidity formation on windows. This
occurs due to the temperature variation between the
window and the external weather conditions.
• Operating the dehumidifier should significantly reduce
condensation formation on windows.
In order to access the humidity "+' and "-" range settings,
you first need to press the "Mode" button, and have no
led indication on the control panel, hence Dryer, Cont, and
SMD modes should be off.
This will allow you to manually change the desired
humidity level.
15