DeWalt DC305 Manual De Instrucciones página 13

FIG. 7
A
C
Cutting with Blade in Horizontal Position
(Fig. 8)
Your saw may or may not be equipped with a horizontal blade clamp.
Installing a blade in the horizontal orientation allows cutting close to
fl oors, walls or ceilings where limited clearance is available. Ensure that
the shoe is pressed against the framing to avoid kickback.
FIG. 8
B
D
Adjustable Shoe (Fig. 9)
Your saw may or may not come with
an adjustable shoe. The shoe will
adjust to limit the depth of cut. Hold
the saw with the underside facing up.
Push the button on the hand grip and
slide the shoe out to one of the three
settings and release the button.
CAUTION: Cut hazard. To prevent
loss of control, never use tool without
shoe.
Cutting (Fig. 10)
WARNING: Always wear eye protection that conforms to ANSI
Z87.1 (CAN/CSA Z94.3) while operating this power tool.
WARNING: Exercise extra caution when cutting towards operator.
Always hold saw fi rmly with both hands while cutting.
11
FIG. 9