Coccolle Nessia Manual Del Usuario página 15

EN
- Damage occurred due to repairs being carried out by unauthorised personnel.
Single wheels being pushed into a vertical position as a result of loading (this is
normal).
- Damage and soiling occurred due to the product being incorrectly packaged for
shipping (courier online purchases).
2. The repair method is determined by the manufacturer/warranty service
provider.
3. The product subject to a complaint should be provided clean.
4. The consumer goods warranty does not exclude or suspend the purchaser's
rights stemming from goods noncompliance with the agreement.
Assembly and use instructions
1.Opening the stroller:
1a. Unlock the stroller as the arrow indicates;
1b. Pull out and pull up the handle;
1c. Press the button on the handle with your finger at the same time pull up the
handle;
1d. When the stroller is opened as you see in picture 1d, you should hear "click"
sounds on both side of the stroller, please examine if the stroller is locked in
safety position before you use it.
2. Assembly and disassembly of the REAR WHEELS:
2a.To assemble the rear wheels: Take one of the rear wheels, insert the rear
axle into the plastic hole as picture 2a shows, until it is locked, then install the
other wheel in the same way.
2b.To disassemble the rear wheels: Pull the rear wheel express button as the
arrow shows, remove the rear wheel in the direction of the arrow then finish
disassembling.
2c. Step down the brake pedal to activate the brake of the stroller, lift up the
pedal to release the brake as shown in picture 2c.
Always lock the brake when put in or take out the child!
3. Assembly and disassembly of the FRONT WHEELS:
3a. To assemble the front wheels: Take one of the front wheels, insert the
vertical shaft into the plastic hole on the wheel hole as shown in picture 3a,
until it is locked, then install the other front wheel in the same way.
3b. To disassemble the front wheels: press the small metal pins as the arrow
shows, at the same time use your hand to pull out the front wheel as arrow
shows to finish disassemble
3c. The front wheels have 360 degrees rotation: Lift up the plastic button on the
front wheels to lock to not rotate, press down the plastic button to release it so it
can rotated at 360degree as the arrow in the pic 3c.
4. Adjustement of the backrest
4a-4b. Lift up the button as the arrow in pic 4a to adjust the backrest in one of
the three positions.
15