Coccolle Nessia Manual Del Usuario página 17

EN
11. Folding the stroller with the seat facing the parent
11a. Fix the seat unit facing to the parent with the backrest in the highest
position.
11b. Fold the legrest towards the backrest.
11c. Fold the backrest and legrest in horizontal position, meaning with the
backrest is the lowest position.
11d. Adjust the length of the handlebar to the lowest positon, then press the
folding second lock at the same time you are pushing the telescopic handle
slightly to unlock the frame.
11e. The handle will fall down automatically, when the handle falls to the lowest
position you can hear "click" sound and this means the frame is fully folded and
locked.
11f. After folding, the stroller can stand.
12. Usage of the safety belt:
Picture 12 illustrates the way of inserting the tongues of the belt into the central
buckle.
12a. Click the buckle to lock the safety belt on both sides as picture 12 shows.
Press the middle button to release the safety button. You can adjust the length
of the seat belt by pulling the safety buckle on both sides as needed.
13. Assembly of the carrycot
13a-13b. In order to unfold the carrycot body, remove the bedding and the
mattress, then squeeze the metal tensioners on the bottom plate of the
carrycot in the direction of the arrows (picture 13a-13b), until it locks in the
special holders. You should hear a "click"sound locking the tensioner in the
holder.
The carrycot is equipped with memory buttons which means it's not mandatory
to press down the buttons to remove the carrycot from the frame simultaneously.
You can either press down the memory button on both sides or you can press
down the memory button one by one and pull up the carrycot when taking it off.
NOTE! The carrycot is designed for children up to 6 months old weighing up to
9 kg, who cannot sit, kneel or trundle unaided. Stop using the carrycot if your
child starts sitting kneeling or trundling by itself.
WARNING: Do not use an additional mattress of thickness of more than 15mm.
The carrycot's canopy has 4 levels of adjustment. In order to adjust it, press
simultaneously the buttons located at the base of the carrying handle and adjust
the desire position.
NOTE! The external canopy cannot be used as the carrying handle. The carry
handle is integrated in the carrycot.
NOTE! Make sure that the carrying handle is locked in the correct position
before moving the carrycot.
14. Fixing on the car seat on the frame
14a.Take the car seat adaptor and fix it on the frame, until you hear a slightly
"click" which means the adaptor is rightly fixed on the frame.
14b. Align the car seat hole to the car seat adaptor, then push the car seat
slightly down till you hear a "click" which means the car seat has been fixed on
the frame.
17