Publicidad
8. Function Selection
The setting of the following remote controller functions can be changed using the remote controller function selection mode. Change the setting when
needed.
Item 1
1. Change Language
Language setting to display
("CHANGE LAN-
GUAGE")
2. Function limit
(1)
Operation function limit setting (operation lock) ("LOCKING
("FUNCTION SELEC-
FUNCTION")
TION")
(2)
Use of automatic mode setting ("SELECT AUTO MODE")
(3)
Temperature range limit setting ("LIMIT TEMP FUNCTION") • Setting the temperature adjustable range (maximum, minimum)
3. Mode selection
(1)
Remote controller main/sub setting ("CONTROLLER MAIN/
("MODE SELEC-
SUB")
TION")
(2)
Use of clock setting ("CLOCK")
(3)
Timer function setting ("WEEKLY TIMER")
(4)
Contact number setting for error situation ("CALL.")
4. Display change
(1)
Temperature display °C/°F setting ("TEMP MODE °C/°F")
("DISP MODE SET-
(2)
Room air temperature display setting ("ROOM TEMP DISP
TING")
SELECT")
(3)
Automatic cooling/heating display setting ("AUTO MODE
DISP C/H")
Item 2
Item 3 (Setting content)
• Display in multiple languages is possible
• Setting the range of operation limit (operation lock)
• Setting the use or non-use of "automatic" operation mode
• Selecting main or sub remote controller
* When 2 remote controllers are connected to 1 group, 1 controller
must be set to sub.
• Setting the use or non-use of clock function
• Setting the timer type
• Contact number display in case of error
• Setting the telephone number
• Setting the temperature unit (°C or °F) to display
• Setting the use or non-use of the display of indoor (suction) air tempera-
ture
• Setting the use or non-use of the display of "Cooling" or "Heating" dis-
play during operation with automatic mode
13
Publicidad
