Publicidad
Idiomas disponibles
Idiomas disponibles
•
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are dangerous
in the hands of untrained users.
•
Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tools operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
•
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
•
Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
1.5
BATTERY TOOL USE AND CARE
•
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when
used with another battery pack.
•
Use power tools only with specifically
designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
•
When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or fire.
•
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
•
Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
•
Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130°C (265 °F) may cause
explosion.
•
Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instructions.
Charging improperly or at temperatures outside
the specified range may damage the battery and
increase the risk of fire.
English (Original Instructions)
1.6
SERVICE
•
Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
•
Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
2
ROUTER SAFETY WARNINGS
•
Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the work by your hand or against the body
leaves it unstable and may lead to loss of control.
3
SYMBOLS
The followings show the symbols used for tool.
Symbol
Explanation
Safety Alert
Indicates a potential personal injury
hazard.
Read Operator's Manual
To reduce the risk of injury, user must
read and understand operator's man-
ual before using this product.
Eye Protection
Always wear eye protection with side
shields marked to comply with ANSI
Z87.1.
Wet Conditions Alert
Do not expose to rain or use in damp
locations.
V
volts
Direct Current
n
No Load Speed
o
.../min
revolutions or reciprocation per minute
r/min
-1
min
No-load speed
5
EN
Publicidad
