Publicidad
Idiomas disponibles
Idiomas disponibles
8.
9.
10. Increase the energy level gradually. Using the highest
Z
Z
11. Experiment by moving the device slowly across the area
12. Clean the treated area: Remove any residual gel from
BellaVisage NA MDD 8813A ALL ED658-03 release.indd 15
BellaVisage NA MDD 8813A ALL ED658-03 release.indd 15
Move the device in gentle massage-like motions on the
area you wish to treat. Progress slowly and carefully. Keep
moving the device ensuring that the 3 electrodes stay in
contact with the skin as you treat the area.
With the device constantly in motion, treat each area for
15 minutes.
energy level will get the best results, but it's important that
you set the energy level that is comfortable for the area you
are treating.
34º - 43º
1-2
You will feel the skin temperature rise as you increase the
energy level. It usually takes about 1-2 minutes for the
device to reach the required temperature. During the
treatment your skin will get a little red. Don't worry; this
is normal.
Stop immediately if you feel any discomfort.
you are treating. If the treated area is hot and you feel
uncomfortable, try moving the device a little faster.
the skin, then rinse the skin with lukewarm water. Dry the
skin with a towel, and apply a facial cream to sooth and
moisturize the skin.
43º
13-14
15
EN
14/03/2021 14:18:36
14/03/2021 14:18:36
Publicidad
