Srhythm Nice Comfort 35 Manual De Usuario página 4

How to Use
Use ANC Function
Press the ANC Button to turn Active Noise
Cancellation ON/OFF
(the LED indicator light will be green when ANC ON.)
ANC
Use Bluetooth Function
1.Hold the Multi-function Button for 3-5 seconds to
turn headphone Bluetooth on,then enter pairing
mode.(the LED indicator light will be blue and red
flashing quickly.)
2.Start your mobile phone Bluetooth and find
headphone Bluetooth pairing name "Srhythm NC35"
to click it to pair.(the LED indicator light will be blue
flashing slowly after paired successfully.)
3‑5S 3.Hold the Multi-function Button for 3-5 seconds
to turn headphone Bluetooth off.
Press to adjust volume. Long press to
skip to next/previous song.
Long press the "Volume Up" and "Volume Down"
buttons for 5 seconds, or Multi-function and
"Volume Down" Buttons for 5 seconds to clear
the pairing
Press the Multi-function Button to
play/pause music or answer/end call.
Double-press the Multi-function Button to
Reject an incoming call or Dial out the last call.
5
2 Press the Multi-function Button three times to
turn on/off the low-latency game mode.
3
Function Details
Easy Pairing
1. Hold the Multi-function Button for 3-5 seconds to turn
headphone Bluetooth on,then enter
pairing mode.(the LED indicator light will be blue and red
flashing quickly.)
2. Keep headphone and your mobile phone as close as
possible during pairing process.
3. Turn on your mobile phone Bluetooth. Search for
headphone Bluetooth signal on mobile phone and click
"Srhythm NC35" to pair.(the LED indicator light will be blue
flashing slowly after pairing successfully.)
4. If you are asked for a password/PIN code during pairing
procedure,please enter "0000" (four zeros).
Pair to the Second Bluetooth Device
1. Please make sure that headphone is connected to the first
Bluetooth device successfully and music is not playing.
2. Hold the Multi-function button until the headphone switch
off and continue with the steps "Easy Pairing"(Let the
headphone re-enter pairing mode,the LED indicator light will
flash blue and red alternately).
3. Pair headphone with the second device according to "Easy
Pairing" steps.
4. Return to the first Bluetooth device and pair it with
headphone again. Now both of your devices are paired with
headphone.
6