Installation Warnings - Invacare Matrx MX2 Back Manual Del Usuario

2.0 S
AFETY

2.3 Installation Warnings

WARNING! Risk of Serious Injury
When establishing the mounting position for the Invacare
ensure the stability of the wheelchair is not compromised. Adjusting the forward
and aft position of the backrest will alter the user's center of gravity within the
wheelchair. A recessed back position can significantly reduce the rearward
stability of the wheelchair. Similarly, a more forward back position will reduce
the wheelchair's forward stability.
WARNING! Risk of Serious Injury or Damage
• The procedures in this manual should be performed by a qualified technician
• Attaching hardware that is loosely secured could cause loss of stability
resulting in serious injury or damage.
• After ANY adjustments, repair or service and before use, make sure that all
attaching hardware is tightened securely.
• DO NOT install the Invacare
with an outside diameter greater than 1" (25mm) or less than 3/4" (19mm).
Otherwise, injury or damage may occur.
®
• The Invacare Matrx
• The mounting position of the Invacare
to the wheelchair's stability. It may be necessary to reposition the front casters,
rear wheels, back angle, tilt-in-space, recline position and/or seat depth
before use.
• Ensure the Invacare
before using. Otherwise injury or damage may occur.
WARNING! Risk of Serious Injury, or Damage
The installation hardware provided is high strength and tested for durability.
DO NOT substitute hardware. Use only the original Matrx MX2 hardware
supplied.
2.4 Back Sizes/ Weight Capacity:
CONFIGURED
MODEL
IMX2wwhh
* wwhh = width/height
Available Sizes: Width: 14" - 18" (355
Please contact your Dealer or Therapist to determine the appropriate back model/size
for your individual needs. For further information on any of our Matrx backs, including
all available models/sizes, please visit www.motionconcepts.com or www.invacare.com.
I
NFORMATION
®
Matrx
®
MX2 back is not intended for power seating applications.
® ®
Matrx MX2 back is properly secured to the wheelchair
DESCRIPTION
Matrx MX2 Back
Height: 6" (150
mm
®
MX2 back assembly onto back canes
® ®
Matrx MX2 back is directly related
CONTOUR
DEPTH
3 in. (76mm)
- 46 0
mm mm
), 9" (230 ), 12" (310
mm
® ®
Matrx MX2 back,
WEIGHT CAPACITY
250 lbs/ (113 kg)
) ;
), 16" (410
mm
)
mm