Publicidad
Idiomas disponibles
Idiomas disponibles
6
7
8
9
BEFORE FIRST USE
Before using the device, remove all wrappings, including corks and rubber straps. Adjust the
feet and clean the outside and inside of the refrigerator with a warm cloth. Do not start the
refrigerator immediately after installation, it must be started after 2-6 hours of standing to ensure
proper operation. To avoid damage to the power cable and any consequential incidents, the
power cable should not be covered by the appliance itself or other objects. Before switching on,
please check if the voltage range of the refrigerator is the same as the power supply. When the
refrigerator is first installed, allow it to stabilize at normal operating temperatures for 2 -3 hours
before filling with fresh or frozen food. If the operation is interrupted, wait 5 minutes before
restarting.
Place the freezer door on the
lower hinge, making sure that
the hinge pin is inserted in the
hole at the bottom of the freezer
door, put the middle hinge back
on the cabinet, making sure that
it is on the opposite side from it
original position.
Place the fridge door on the
middle hinge, making sure that
the hinge pin is inserted in the
hole at the bottom of the fridge
door. Place the top hinge on the
fridge door, fixing the screw and
cover.
Take out the top hinge from top
refrigerator door,rotate the top
hinge 180 degrees, take out the
hinge pin out, reverse and
reinstall it to the opposite side.
Take the left top hin gcoever
parts from the bag and install it
to the left side, tighten a l l the
screws.
40
Publicidad
