SOMFY V SYSTEM PRO Manual De Instrucciones página 54

EN
4.3 Operation of the buttons
In stand-by (hand-set hung up)
No action in this state of operation
No action in this state of operation
Hand-set picked up (without communication)
Communication between monitors/hand-sets: press the number of times
corresponding to the address of the monitor or hand-set to be called.
Note: if the addresses of the monitors are not assigned, the hand-set
used emits a series of beeps.
If the relay module ref. VSP-RM02 is installed, pressing this button
activates relay no.1 (R1), allowing a gate or striker, etc. to be controlled
(for more information, see the memory aid at the start of the monitor
user guide
Hand-set picked up (during communication)
Activating the external module relay:
While communication is activated with an external module, pressing this
button activates the relay (see the memory aid at the start of the monitor
user guide
If the relay module ref. VSP-RM02 is installed, pressing this button
activates relay no.1 (R1), allowing a gate or striker, etc. to be controlled
(for more information, see the memory aid at the start of the monitor
user guide
8
).
).
).
Copyright © 2018 SOMFY ACTIVITES SA. All rights reserved.